Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20 slika
Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20 slika
Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20 slika

* slike so simbolične

Tlačni regulator DRV 225, Visokotlačna izvedba, G 1/2, 1.5 - 20

SKU: 101439RIE
EAN: 4047322084277

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 1/2, Control range 1.5 - 20 bar

Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence

minimal friction.

Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Čas dobave 3 - 5 dni
462,33 €
ali od 12,30 € / mesec
Izračunaj obrok
leanpay logo
Obrestno financiranje
  • 12,30 € x 48 mesecev
  • 15,72 € x 36 mesecev
  • 22,58 € x 24 mesecev
  • 43,23 € x 12 mesecev
  • 84,57 € x 6 mesecev
  • 167,26 € x 3 mesecev

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.

Primerjaj z ostalimi
Šifra Navoj Vzmet pokrova motorja Pretok KVS vrednost [m³/h] DN D [mm] A [mm] C [mm] B [mm] Zaloga Cena Nakup Natisni
101444RIE G 2 Grey cast iron 7.2 50 70.0 146.5 349.0 419.0
Čas dobave 3 - 5 dni
1.858,77 € Natisni
101438RIE G 3/8 Pressed brass 0.6 10 47.0 70.0 141.0 188.0
Čas dobave 3 - 5 dni
357,42 € Natisni
101443RIE G 1 1/2 Grey cast iron 4.5 40 61.0 108.0 331.0 392.0
Čas dobave 3 - 5 dni
1.389,09 € Natisni
101441RIE G 1 Pressed brass 1.6 25 56.0 95.0 201.0 257.0
Čas dobave 3 - 5 dni
839,99 € Natisni
101442RIE G 1 1/4 Grey cast iron 4.2 32 61.0 104.0 324.0 385.0
Čas dobave 3 - 5 dni
1.137,70 € Natisni
101440RIE G 3/4 Pressed brass 1.3 20 46.5 85.0 182.0 228.5
Čas dobave 3 - 5 dni
574,25 € Natisni
101437RIE G 1/4 Pressed brass 0.5 8 47.0 70.0 141.0 188.0
Čas dobave 3 - 5 dni
357,42 € Natisni
101439RIE G 1/2 Pressed brass 1.2 15 46.5 85.0 182.0 228.5
Čas dobave 3 - 5 dni
462,33 € Natisni

Opis

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 1/2, Control range 1.5 - 20 bar

Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence

minimal friction.

Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Tehnični podatki in specifikacije

Navoj G 1/2
Max. vhodni tlak [bar] 40
Max. temperaturno območje [°C] 75
Ohišje Red brass 2.1096.01
Tesnilo NBR
DN 15
Min. krmilno območje [bar] 1.5
Max. krmilno območje [bar] 20
Pretok KVS vrednost [m³/h] 1.2
Vzmet pokrova motorja Pressed brass
Razmerje zmanjšanja max. 6:1
A [mm] 85.0
B [mm] 228.5
C [mm] 182.0
D [mm] 46.5